Waterproof coating W32 two-component
Waterproof coating W32 two-component
Product Briefing
This product can be used by mixing and blending in appropriate proportions. It has the characteristics of good construction performance, good flexibility, strong impermeability, high bonding strength, and good durability, and can be applied on damp substrates. Suitable for waterproof treatment of building parts such as interior and exterior walls, bathrooms, kitchens, basements, and sinks.
Product Features
Good waterproof performance
Good flexibility
Good weather resistance
Good construction performance
Product specifications
Product specifications: 39kg/set (15kg/barrel liquid+24kg/bag powder)
Scope of application
Suitable for waterproof treatment of building parts such as interior and exterior walls, bathrooms, kitchens, basements, and sinks.
Execution standards
GB/T 23445-2009 Ⅱ型
Construction technology
Base treatment
The base should be flat, sturdy, dry, free from oil stains, unevenness, honeycombing, rough surfaces, and peeling. Repair and level the cracks and unevenness of the base layer, use reinforcement agents to treat loose base layers, and perform leak sealing treatment at leakage points first.
ingredient
According to the requirements of mixing proportion (lotion: powder is about 1:1.6), slowly pour the powder into the liquid, and fully mix for 3-5 minutes until the waterproof slurry is mixed into a uniform gel without particles. The mixed slurry should be used up within 2 hours and should not be used after hardening.
construction
Before painting, the base layer should be fully moistened, but there should be no visible water. Use a brush or roller to evenly apply the mixed slurry on the base surface to be painted. Generally, it needs to be painted two to three times, and the construction time interval for each coat should be based on the previous layer being dry and not sticky to the hand. The painting direction should be perpendicular to the direction of the previous coat.
Reference amount
1.5-2.3kg/m2, with a coating thickness of 1.5mm (the actual amount used depends on the purpose, coating part, surface roughness, environmental factors, etc.)
Precautions
The base layer should be flat, solid, clean, free of floating ash and oil stains, and the water absorbing base layer must be pre treated.
Strictly follow the product instructions for ingredients and do not mix with cement or other additives.
The construction temperature is between 5-35 ℃, and it is difficult to carry out construction on rainy days or when there is visible water on the base layer.
The waterproof coating must be completely dried before surface decoration construction can be carried out. The drying time should not be less than 48 hours, and it should be appropriately extended in humid environments.
This product contains cement ingredients, and attention should be paid to protecting the eyes. In case of contact, it can be washed with plenty of water.
Transportation and storage
Avoid rain and sun exposure during transportation. Store in a cool and dry warehouse to prevent moisture and strictly prohibit contact with water.
Storage period: 12 months for barrel products and 12 months for bagged products.
