Dingli ceramic tile backing adhesive
Dingli ceramic tile backing adhesive
Product Briefing
This product is a single component vitrified tile back glue, which is compounded by a special monomer structure polymer lotion and a variety of functional modifiers. It has excellent two-way affinity, excellent bonding performance, and strong permeability. It is suitable for pasting indoor vitrified tiles of various sizes and water absorption, and can effectively reduce tile hollowing, dropping and other phenomena.
Product Features
Strong adhesion
high low temperature
Convenient construction
Green and environmentally friendly
Product specifications
7.5KG per barrel
Scope of application
Suitable for pasting vitrified tiles with various water absorption rates.
Construction method
Brick material processing
Before painting, clean the back of the brick material and remove any substances that may affect the bonding, such as demoulding powder, oil stains, and protective agents.
Construction operation
After mixing the adhesive evenly with a brown brush or small roller, apply it directly to the back of the tile (leaving about 1-2cm around the edges of the tile to prevent the adhesive from flowing to the front and contaminating the tile surface). When the surface is transparent, use tile adhesive or ordinary cement or cement mortar to lay it.
Reference amount
1kg/12m2 (depending on the base water absorption rate and construction thickness)
Precautions
The construction environment temperature should be between 5-35 ℃, avoiding working in high humidity environments and using in long-term water immersion environments.
No need to add water, open the bucket and stir evenly before use directly.
If using cement or cement mortar for pasting, it is recommended to also apply a layer of single component vitrified tile back adhesive on the wall surface for better bonding effect.
It is recommended to wear gloves during operation to prevent the product from splashing into the eyes. If there is any, rinse with clean water in a timely manner. If uncomfortable, seek medical attention immediately.
Transportation and storage
During transportation, avoid exposure to rain, direct sunlight, cold, and collisions; When the temperature is below 5 ℃, insulation measures should be taken. It should be stored in a cool and dry place at a temperature above 0 ℃.
Storage period: 12 months.
